Midday

By defining the midday break, you indicate to EDT what the software will consider as half-days.

Define the midday break

1. Go to the menu Parameters > institution > Midday.
2. Select Day with a break delimited by.
3. Via the drop-down menus, indicate the time for the end of the morning and the time for the beginning of the afternoon. If the break is a half hour, you can tick the option Begin again in full hours after the midday break; you will choose the times to be displayed accordingly (Time grid).
4. If the institution is close Wednesday/Saturday afternoon, click on the concerned half-day; it will be considered to be non-working (Half-day).
5. To impede the placement of courses in this range, you must enter the unavailability or activate the automatic management of the half-board (Half-board).